Technical Data; Inserting The Router Bit (See Figure A) - Bosch GOF Professional 1250 CE Oorspronkelijke Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor GOF Professional 1250 CE:
- Oorspronkelijke gebruiksaanwijzing (223 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18 | English
Technical data
Router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Soft start
Connection for dust extraction
Digital depth display
Light ring
Compatible collets
Router cage stroke
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-17.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power
level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-17: a
2
K = 1.5 m/s
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
1 609 92A 9JJ | (23.05.2024)
min
mm
inches
mm
kg
Fitting
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Inserting the Router Bit (see figure A)
Wearing protective gloves while fitting and changing
u
router bits is recommended.
Router bits are available in a wide variety of designs and
2
= 7 m/s
,
qualities depending on the intended application.
h
Router bits made of high-performance high-speed steel
(HSS) are suited to machining soft materials such as soft-
wood and plastic.
Router bits with carbide tips are especially suitable for
hard and abrasive materials such as hardwood and alu-
minium.
Original router bits from the extensive range of Bosch ac-
cessories are available from your specialist dealer.
Only use undamaged and clean router bits.
– Swivel the spindle locking lever (6) anticlockwise as far
as it will go (➊). If necessary, turn the motor spindle by
hand until you hear it engage.
– Loosen the cap nut (4) with the open-ended
spanner (31) (width across flats 19 mm) by turning it
clockwise (➋).
– Slide the router bit into the collet. The bit shank must be
inserted into the collet at least up to the mark.
– Tighten the cap nut (4) with the open-ended
spanner (31) (width across flats 19 mm) by turning it an-
ticlockwise. Lock the spindle locking lever (6) fully back
into place.
GOF 1250 CE
3 601 F26 0..
W
1250
–1
10000–24000
●
●
●
●
–
–
6–8
¼
60
3.6
/ II
GOF 1250 LCE
3 601 F26 1..
1250
10000–24000
●
●
●
●
●
●
6–8
¼
60
3.7
/ II
Bosch Power Tools
Advertenties
Inhoudsopgave
