Product Description And Specifications; Intended Use; Product Features - Bosch GOF Professional 1250 CE Oorspronkelijke Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor GOF Professional 1250 CE:
- Oorspronkelijke gebruiksaanwijzing (223 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Only use the coin cells listed in this operating manual.
u
Do not use any other coin cells or other forms of electrical
power supply.
Do not attempt to recharge the coin cell and do not
u
short circuit the coin cell. The coin cell may leak, ex-
plode, catch fire and cause personal injury.
Remove and dispose of drained coin cell correctly.
u
Drained coin cell may leak and damage the product or
cause personal injury.
Do not overheat the coin cell or throw it into fire. The
u
coin cell may leak, explode, catch fire and cause personal
injury.
Do not damage the coin cell and take the coin cell
u
apart. The coin cell may leak, explode, catch fire and
cause personal injury.
Do not allow damaged coin cells to come into contact
u
with water. Leaking lithium may mix with water to create
hydrogen, which could cause a fire, an explosion, or per-
sonal injury.
Stop using the power tool if the battery compartment
u
cover no longer closes; remove the coin cell and have
the power tool repaired.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for copy routing as well as routing
grooves, edges, profiles and elongated holes in wood,
plastic and light building materials while resting firmly on the
workpiece.
Can even be used to machine non-ferrous metals when used
at a low speed with the appropriate router bits.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Right handle (insulated gripping surface)
(2) Lock-on button for on/off switch
(3) Light ring (GOF 1250 LCE)
(4) Cap nut with collet
a)
(5) Router bit
(6) Spindle locking lever
(7) Screw for parallel guide rods (2x)
Bosch Power Tools
(8) Chip protection
(9) Step buffer
(10) Adjusting screws for step buffer
(11) Guide plate
(12) Holder for parallel guide rods
(13) Base plate
(14) Depth stop
(15) Screw for depth stop fixing
(16) Button for zero point of depth stop (GOF 1250 LCE)
(17) Button for switching the unit of measure (mm/inch)
(GOF 1250 LCE)
(18) On/off switch for digital depth display
(GOF 1250 LCE)
(19) Adjustment range for fine adjustment of routing
depth
(20) Left handle (insulated gripping surface)
(21) Display (GOF 1250 LCE)
(22) Battery compartment cover (GOF 1250 LCE)
(23) Release lever
(24) Scale for fine adjustment of routing depth
(25) Adjustment knob for fine adjustment of routing depth
(26) Scale for depth-of-cut fine adjustment
(GOF 1250 LCE)
(27) Slide with index mark (GOF 1250 LCE)
(28) Speed preselection thumbwheel
(29) On/off switch
(30) Extraction hose port
(31) Open-ended spanner with width across flats of
19 mm
(32) Extraction hose (dia. 35 mm)
(33) Parallel guide
(34) Rod for parallel guide (2x)
(35) Wing bolt for parallel guide fine adjustment (2x)
(36) Wing bolt for parallel guide coarse adjustment (2x)
(37) Adjustment knob for parallel guide fine adjustment
(38) Adjustable fence for parallel guide
(39) Extraction adapter for parallel guide
(40) SDS guide-bushing adapter
(41) Fastening screw for guide bushing adapter (2x)
(42) Release lever for guide bushing adapter
(43) Guide bushing
(44) Pan head screw for guide plate fixing (5x)
(45) Centring pin
(46) Seal
a) This accessory is not part of the standard scope of delivery.
English | 17
a)
a)
1 609 92A 9JJ | (23.05.2024)
Advertenties
Inhoudsopgave
