Inhoudsopgave
Advertenties
•
If the blade gets stuck, it can cause the workpiece to violently kick back towards the user. For this
reason, never stand directly behind the saw blade when sawing.
•
Wear a face mask if excessive amounts of dust are generated or when sawing materials that are a
health hazard.
Never stop the saw blade by pressing down on the saw, or by pressing on the side of the blade.
•
•
The saw blade will continue to run for a short while after the machine has been switched off.
Rated voltage
Output power
Free rotation speed
Blade
Capacity, crosscut/mitre saw:
Capacity, table circular saw:
Sound power level, LwA
Sound pressure level, LpA
Vibration level
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
ENGLISH
TECHNICAL DATA
90°
45° mitre
45° bevel
45° bevel + mitre
90°
45° bevel
230 V ~ 50 Hz
1 800 W
4 200 rpm
Tempered metal, 254 mm
65 x 155 mm
65 x 105 mm
40 x 155 mm
40 x 105 mm
75 mm
50 mm
105 dB(A), K=3 dB
92 dB(A), K=3 dB
1,7 m/s², K=1,5 m/s²
41
Advertenties
Inhoudsopgave
