Download Inhoudsopgave Inhoud Print deze pagina

English; Safety; Introduction - Vetus BOWPRO CANVXCJP Installatiehandleiding

Joystick bedieningsinterface
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 6

ENGLISH

1

Safety

Warning indications
Where applicable, the following warning indications are used in this
manual in connection with safety:
Indicates that great potential danger exists that can lead to serious
injury or death.
Indicates that a potential danger that can lead to injury exists.
Indicates that the usage procedures, actions etc. concerned can re-
sult in serious damage to or destruction of the engine. Some CAU-
TION indications also advise that a potential danger exists that can
lead to serious injury or death.
Emphasises important procedures, circumstances etc.
Symbols
Indicates that the relevant procedure must be carried out.
Indicates that a particular action is forbidden.
Share these safety instructions with all users.
General rules and laws concerning safety and accident prevention
must always be observed.
This product should only be installed and maintained by
qualified personnel who have read and understood the in-
structions and precautions in this manual . Failure to follow
the instructions in this manual may result in serious injury or
property damage . The manufacturer shall not be liable for any
damages resulting from improper installation or maintenance
by unqualified personnel .
10
021004.11
D
anGer
W
arninG
c
aution
n
ote
W
arninG
2

Introduction

This manual provides guidelines for the installation of the VETUS
bow and stern thruster interface CANVXCJP.
Joystick (not included)
The CANVXCJP allows a proportional VETUS joystick (product code:
DBPPJX) to be connected to the VETUS CAN bus system. The joystick
allows proportional control of the thrust of a VETUS BOWPRO bow
and/or stern thruster.
The quality of the installation is decisive for the proper functioning of
the system. Almost all faults can be traced back to errors or inaccura-
cies during installation. It is therefore imperative that the steps given
in the installation instructions are followed in full during the installa-
tion process and checked afterward.
Unauthorised modifications shall exclude the liability of the manu-
facturer for any resulting damage .
• During use ensure the correct battery voltage is available.
Changing over the plus (+) and minus (-) connections will
cause irreparable damage to the installation .
Never work on the electrical system while it is energized .
Installation manual BOWPRO control interface CANVXCJP
CANVXCJP
W
arninG
W
arninG

Advertenties

Inhoudsopgave
loading

Inhoudsopgave