Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1 x Plastic bottle
om
1 x Screw tool
uct
1 x Plastic travel case
of
1 x Instruction manual
ed
3. HOW TO USE
Please note the technical specifications of the pro-
er-
duct before proceeding with the assembly of the
or
product:
ob-
Voltage: 21V
Frequency: 50-60Hz
rty
Power: 72Wh
Battery Voltage: 21V Li-ion 1500mAh
s.
Effective cutting length: maximum 8cm
uct
ns
Function description
1- Safety bezel
di-
2- High quality chain
sk,
3- LED light
our
4- Guide plate
5- Lock button
te-
6- Comfortable handle
eek
7- Switch button
hi-
8- High-power battery
9- Guide cover
m-
10- Hexagon screw
ng,
th,
Instructions of use
di-
1. To place the battery into the product, slide it
through the bottom of the product as shown in Ima-
ally
ge F.
or
2. Hold the chainsaw firmly and securely by the
ow
handgrip.
3. Press the lock button (5) and press the ON/OFF
button (Image G) to start the machine.
Note: Always wear gloves when handling the Roto-
uct
razer® Mini Chainsaw.
4. For safety proposals, the product will only work
ag-
when the lock button (5) is pressed together with
ra-
the ON/OFF button.
der
5. To switch off the Rotorazer® Mini Chainsaw, re-
lease the ON/OFF switch.
ith
ts!
• Never reach over the riving knife or under the
fa-
base plate. There is a risk of injury!
• Do not cut if the saw chain is in contact with the
ns
workpiece, is in the workpiece or may hit an object.
ult
This can lead to serious injuries.
m-
• Clamp loose workpieces before cutting them.
ra-
Remove foreign objects such as nails, screws, etc.
• When cutting a branch that is under tension be
alert for spring back. When the tension in the wood
fibres is released, the spring-loaded limb may stri-
ke the operator and/or throw the chainsaw out of
control.
• Use extreme caution when cutting brush and
saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
• When the saw chain is running, first place the
base plate on the surface of the workpiece and let
the saw cut on its own. Apply only light pressure to
the saw. The chain speed should not be
much slower.
Kickback
• The shape of the riving knife largely eliminates the
risk of kickback.
• The saw is optimally protected against kickback
by the riving knife with tip protection. Never remove
the riving knife. There is a risk of injury!
Chain lubricating
- You can use the Plastic Bottle included in the set
to apply oil on the product.
- Do not use engine oil, waste oil or other mineral
oils.
- If the saw makes a rattling noise, the chain must
be lubricated.
- The use of the chainsaw without lubricating the
chain with chain oil will damage the saw chain and
the guide bar.
How to remove the old chain and mount the new
chain
• Please remove the battery before extracting the
chain.
• Only handle the saw chain with gloves and remo-
ve the battery first!
• Inspect the saw chain and the guide bar for dama-
ge or signs of wear.
• Never put a new saw chain on a worn guide bar.
• Let each new saw chain break-in first!
• When attaching the saw chain, observe the run-
ning direction!
1. Unscrew the head screw counter-clockwise in
order to remove the sprocket cover. Turn the knob
on the guide cover to align the guide adjustment
screw post boss with the screw hole (Image A).
2. The adjusting screw boss on the guide plate co-
ver is aligned with the guide plate hole position to
install the guide plate cover (Image B).
3. When the knob is turned, the chain will be pulled
down and loosened continuously. When the chain
is loosened, it can rebound quickly.
4. Manually screw the screws into the bottom of the
machine without tightening (Image C).
5. Use a wrench to loosen and remove the hex
screws on the guide plate cover and to tighten the
socket head cap screws (Image D).
6. The new chain will be stretched in the early sta-
ge of use. Please check and adjust to the appro-
13
Advertenties
Inhoudsopgave
