Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
13. Momentarily press the MODE button again to
indicate '%'
14. Read the % duty cycle in the display
15. Press and hold the MODE button to return to current
measurement
16. Press EXIT for 2 seconds into the function of AC+DC,
test DC and AC TURE Rms
5.7 Resistance measurement
WARNING: To avoid electric shock, disconnect
power to the unit under test and discharge all
power to the unit under test and discharge all
capacitors before taking any resistance
capacitors before taking any resistance
measurements. Remove the batteries and
measurements. Remove the batteries and
unplug the line cords.
1. Set the function switch to the
position
2. Insert the black test lead banana plug into the
negative COM jack
3. Insert the red test lead banana plug into the positive
Ω jack
4. Press the MODE button to indicate 'Ω' on the display
5. Touch the test probe tips across the circuit or part
under test. It is best to disconnect one side of the
part under test so the rest of the circuit will not
interfere with the resistance reading
6. Read the resistance in the display
Nieaf-Smitt is a brand name of Mors Smitt
52
www.nieaf-smitt.com
green
Ω CAP
Advertenties
Hoofdstukken
Inhoudsopgave
