Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Safety instructions
This meter has been designed for safe use, but must be
operated with caution. The rules listed below must be
carefully followed for safe operation.
NEVER apply voltage or current to the meter that
exceeds the specified maximum.
Function
VDC or VAC
mA AC/DC
AAC/DC
Frequency, resistance,
capacitance, duty cycle, diode
test, continuity
Temperature
Surge protection
Use extreme caution when working with high voltages.
Do not measure voltage if the voltage on the 'COM' input
jack exceeds 1000 V above earth ground.
Never connect the meter leads across a voltage source
while the function switch is in the current, resistance, or
diode mode. Doing so can damage the meter.
Always discharge filter capacitors in power supplies and
disconnect the power when making resistance or diode
tests.
Always turn off the power and disconnect the test leads
before opening the covers to replace the fuse or batteries.
Never operate the meter unless the back cover and the
battery and fuse covers are in place and fastened securely.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Nieaf-Smitt is a brand name of Mors Smitt
38
www.nieaf-smitt.com
Maximum input
1000 VDC/DC RMS
500 mA 1000 V fast acting fuse
10 A 1000 V fast acting fuse (20
A for 30 seconds max. every 15
minutes)
1000 VDC/AC RMS
1000 VDC/AC RMS
8 kV peak per IEC 61010
Advertenties
Hoofdstukken
Inhoudsopgave
