Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
5
Operation
5.1 General
WARNING: Risk of electrocution. High-voltage
circuits, both AC and DC, are very dangerous
circuits, both AC and DC, are very dangerous
and should be measured with great care.
and should be measured with great care.
1. ALWAYS turn the function switch to the OFF position
when the meter is not in use
2. If 'OL' appears in the display during a measurement,
the value exceeds the range you have selected;
change to a higher range
5.2 DC voltage measurement
CAUTION: Do not measure DC voltages if a
CAUTION: Do not measure DC voltages if a
motor on the circuit is being switched ON or
motor on the circuit is being switched ON or
OFF. Large voltage surges may occur that can
OFF. Large voltage surges may occur that can
damage the meter.
1. Set the function switch to the
2. Insert the black test lead banana plug into the
negative COM jack
3. Insert the red test lead banana plug into the positive
V jack
4. Touch the black test probe tip to the negative side
of the circuit
5. Touch the red test probe tip to the positive side of
the circuit
6. Read the voltage in the display
green
VDC position
47
www.nieaf-smitt.com
Nieaf-Smitt is a brand name of Mors Smitt
Advertenties
Hoofdstukken
Inhoudsopgave
