Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. To install the spray arm back, insert the
mounting element in the spray arm and
12. TROUBLESHOOTING
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
The majority of problems that may occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code
You cannot activate the appli‐
ance.
The programme does not start.
fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
Refer to the below table for information on
possible problems.
With some problems, the lights related to the
programme buttons flash intermittently to
indicate a malfunction and the alarm code.
Possible cause and solution
• Make sure that the mains plug is connected to the mains
socket.
• Make sure that there is no damaged fuse in the fuse
box.
• Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the
end of the countdown.
• The appliance recharges the resin inside the water soft‐
ener. The duration of the procedure is approximately 5
minutes.
ENGLISH
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
