Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
After starting the programme, the appliance
recharges the resin in the water softener for
up to 5 minutes. The washing phase starts
only after this procedure is complete. The
procedure is repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for dishwashers
only. Fine salt increases the risk of
corrosion.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its handle to
get the last granules inside.
5. Remove the salt around the opening of
the salt container.
9. DAILY USE
1. Open the water tap.
14
ENGLISH
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out of the salt
container when you fill it. After you fill the
salt container, immediately start a
programme to prevent corrosion.
8.2 How to fill the rinse aid dispenser
B
CAUTION!
The compartment (C) is for rinse aid only.
Do not fill it with detergent.
CAUTION!
Only use rinse aid designed specifically
for dishwashers.
1. Press the release element (A) to open the
lid (B).
2. Pour the rinse aid in the dispenser (C)
until the liquid reaches the marking
"FILL".
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid locks
into position.
Fill the rinse aid dispenser when the
indicator (D) is clear.
2. Press and hold
activated.
D
C
A
until the appliance is
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
