Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Replacing the oven lamp
Cleaning the gas hob
EN 24
All manuals and user guides at all-guides.com
The oven lamp fitting is live. There is a danger of electric shock!
Attention!
The lamp in this household appliance is only suitable for illumination of
this appliance. The lamp is not suitable for household room illumination.
• Before replacing the oven lamp switch the appliance off by
removing the plug from the socket or switching off the fuse in
the fuse box.
• The lamp is consumable material and is not covered by the
guarantee. For replacement, you will need an oven bulb with the
following specifications: fitting G9, 230V/25W oven.
• Unscrew the glass cover (anticlockwise) and replace the oven lamp.
Screw the glass cover back on tightly.
Your gas hob has been manufactured from high-grade, easy-to-
clean materials.
• Regular cleaning immediately after use prevents food spills from
becoming ingrained and causing stubborn stains that are difficult to
remove. Use a mild cleaning detergent to remove stains. Do not use
too much moisture, as there is a risk that it will penetrate into the
burner or vent holes.
• Clean the control knobs, burners and pan supports first and then
the drip tray. This prevents the drip tray from becoming dirty again
during cleaning.
• The ignition plugs should preferably be cleaned with a cloth. Do
this carefully. Otherwise the spark plug can become defective. The
spark plug will only operate correctly in a dry environment. If the
plug is very dirty, you can clean it with a tiny brush.
• Set the pan supports down vertically, without sliding them over
the drip tray.
• Assemble the burner parts using the guide ridges. Pay attention to
the notches for the ignition plug and thermocouple. Make sure the
burner parts are lying flat.
Advertenties
Hoofdstukken
Inhoudsopgave
