Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Mounting the wall clock (see Fig. A)
NOTE: You will require a screw and a dowel to mount the product as these are not
included with your product . You will also need an electric drill and screwdriver .
NOTE: Make sure that the screw and dowel are suitable for the wall .
Before drilling the drill hole, ensure that there are no gas, water or electrical lines that
could be drilled into or damaged in the area where you will be drilling .
1 . Mark the drill hole on the wall .
2 . Drill the hole with an electric drill .
3 . Insert the dowel into the drilled hole .
4 . Using a screwdriver, screw the screw ¾ of the way into the dowel .
5 . Hang the product on the screw using the mounting hold
product .
˜ Operation
Setting the time
Turn the minute hand clockwise to set the current time (the hour hand will follow
automatically) .
Note: Please turn the minute hand carefully, otherwise the hands will deform or
damage .
Note: As you move through the hours, the cuckoo alarm will active, no need to
listen to the alarm and you can keep setting the time .
The clock part is ready .
at the back of the
4 ]
[
GB/IE/NI
11
Advertenties
Hoofdstukken
Inhoudsopgave
