Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CR 3 A2
Further information can be found in the "Playback" section on page 28 and in "Playback menu" section on
page 40.
12.2 Transferring recordings to a computer
There are two possible ways to copy recordings from the Dashboard Camera to a computer:
by connecting the device to a computer via the USB cable
by inserting the SD memory card into a card reader.
12.2.1 Connecting the Dashboard Camera to a computer
1. Use the USB cable supplied to connect the Dashboard Camera to
an available USB port on a computer. Insert the Mini USB plug
(24) of the supplied USB cable into the Mini USB/charging
connector (14) of your Dashboard Camera and the USB Type A
plug (25) into a USB port on your computer.
2. The Dashboard Camera will then turn on automatically and you
will be asked to select the "Mass Storage" mode.
3. Press the OK button (5) to confirm.
The computer will now set up a removable disk that can be used to
access your recordings.
When connecting to the PC via the USB cable, the content of the SD memory card will be read-
only. This means you will not be able to delete, rename or write to any files on the Dashboard
Camera from the PC. It is only possible to play already-recorded content.
12.2.2 Using a card reader
If your computer has a card reader which is compatible with microSD or SD memory cards, you can read
the contents of the memory card directly. Remove the memory card from the powered-off Dashboard
Camera.
1. Insert the microSD card directly into the microSD card reader or into the SD card adapter.
46 - English
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
