Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Align the dashboard camera so that you can see the display (13) well. To do this, loosen the knurled
screw (20) to adjust the tilt angle of the dashboard camera. Re-tighten the knurled screw (20). Then,
twist the dashboard camera around the vertical axis into the position you want
4. To remove the car mount from the windscreen, flip the lever (23) up again and then pull on the
release tab (22) on the suction pad.
6.3 Charging the battery
The Dashboard Camera battery can be charged via the USB port on a computer or with the car charger
supplied.
In addition to the following options, you can also connect the Dashboard Camera to an
external USB power adapter (not supplied) in order to charge the Dashboard Camera. You
can purchase a suitable 5V USB power adapter with at least 1A output current from any
electronics retail outlet.
Be sure to familiarise yourself with the optional power adapter before connecting
CAUTION!
it. Read the User's Manual of your optional power adapter.
6.3.1 Charging the battery with a USB cable
If you want to charge the Dashboard Camera battery or power the Dashboard
CAUTION!
camera via the PC, make sure to leave at least one USB port on the PC free (no devices
connected).
1. Use the USB cable to connect the Dashboard Camera to an
available USB port on a computer. Insert the Mini USB plug
(24) of the supplied USB cable into the Mini USB/charging
connector (14) of your Dashboard Camera and the large plug
(25) into a USB port on your computer.
2. The Dashboard Camera will then turn on automatically and you
will be asked to select the "Mass Storage" mode.
Some computers do not supply USB power while they are
turned off. If the Dashboard Camera does not charge,
make sure your computer is switched on.
CR 3 A2
English - 17
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
