Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CR 3 A2
Press these buttons during video playback to adjust the sound volume.
Press the Down button (4) during video recording to mute the microphone or
to reactivate it.
Press this button with recording or playback paused and no menu displayed
M
to open the settings menu associated with the current operating mode. Press
Menu button (3)
this button again to open the general Dashboard Camera setup menu.
While a menu is displayed, press this button to quit the menu.
Press this button in Video mode to start or stop recording.
OK button (5)
Press this button in Photo mode to take a picture.
While a menu is displayed, press this button to select a menu item or to
confirm a value and save it.
Press this button in Playback mode to start or pause playback.
Press this button multiple times to toggle cyclically between the Video
Operating mode
recording, Photo recording and Playback operating modes.
button (6)
Press this button during video recording to protect the current video and
Protect
prevent it from being overwritten during loop recording.
button (7)
Press this button briefly to switch the Dashboard Camera on or to switch the
On/Off
display (13) off.
button (8)
Press and hold this button for at least 3 seconds to power the Dashboard
Camera off.
Press this button during video recording to switch off the display (13). Video
recording will continue. Press any button to switch the display (13) back on.
Press this button in Photo mode to switch off the display (13). Press any
button to switch the display (13) back on.
5.1.2 LED indicators
LED
Description
White: device is being initialised (after switching on), video recording stopped
Recording LED
White flashing: video recording in progress
(11)
Red: battery is charging
Charge LED (12)
14 - English
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
