Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The lamp does not work.
If your appliance is still not working properly after making
the above checks, contact the After Sales Centre.
Replacing the lamp
1. Disconnect the appliance.
2. Push the movable part to unhook the lamp cover (1).
3. Remove the lamp cover (2).
4. Replace the lamp with one of the same power and
specifically designed for domestic appliances only.
5. Install the lamp cover.
6. Connect the appliance.
7. Open the door. Make sure that the lamp comes on.
Technical data
Dimension
Height
Width
Depth
Rising Time
Voltage
Frequency
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
Installation
Caution! Read the "Safety Information" carefully for
your safety and correct operation of the appliance
before installing the appliance.
Downloaded from Fridge-Manual.com Manuals
All manuals and user guides at all-guides.com
Possible cause
The appliance has no power. There is
no voltage in the mains socket.
The lamp is in stand-by.
The lamp is defective.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Con-
ZRB934XL
ZRB934PW
1750 mm
595 mm
658 mm
20 h
230 V
50 Hz
Positioning
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Connect a different electrical appliance
to the mains socket. Contact a qualified
electrician.
Close and open the door.
Refer to "Replacing the lamp".
1
2
tact the Service Center.
ZRB936XL ZRB936PW
1850 mm
595 mm
658 mm
20 h
230 V
50 Hz
Solution
ZRB940XL
ZRB940PW
2010 mm
595 mm
658 mm
20 h
230 V
50 Hz
21
Advertenties
Hoofdstukken
Inhoudsopgave
