Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Settings
Touch
and
together to enter setup
menu. The appliance must be in operating
mode to enter setup.
Menu navigation:
,
– go to another menu item; menu
items are rotated in a loop;
OK – confirm;
– open pre-set programmes menu (clear
unconfirmed settings);
– open heating functions menu (clear un-
confirmed settings);
– open timer menu (clear unconfirmed
settings);
– go back. If you are on the main screen
– clear settings and enter operating mode.
[do nothing for 20s] - if you do nothing for 20
seconds, settings are cleared and the appli-
ance enters operating mode.
"Setup" is displayed on the left and available
options on the right.
- 1. Language
- 2. Light
- 3. ECO;
- 4. Display brightness
- 5. Handle backlight brightness (option)
- 6. Service
- 7. Factory settings.
1. Language.
"Select language" is displayed on the left.
Available language selection options are
displayed on the right. Current language is
the default option.
Touch
,
to change the language. Touch
OK to select your preferred option. The "Se-
lect language" message and "Touch OK to
confirm" will be displayed in your preferred
language.
Touch
or
to go back to language selec-
tion. Touch to go back to the current default
language. Touch OK to store the default lan-
guage and go back to the setup menu
All manuals and user guides at all-guides.com
2. Light
"Select light mode" is displayed on the left.
Available options are displayed on the right:
Continuous and ECO. The default is the cur-
rent setting and the factory setting is: ECO.
Touch OK to store the current setting and go
back to the configuration menu.
Appliance specification assumes ECO set-
ting is used. In continuous setting light is
turned on:
- when the door is open;
- during heating function
3. ECO
"Select oven operation mode" is displayed
on the left. Available options are displayed
on the right: Normal operation and ECO.
The default is the current setting and the
factory setting is: ECO. Touch OK to store
the current setting and go back to the con-
figuration menu.
Appliance specification assumes normal
setting is used. ECO mode affects the oper-
ation of pre-set programmes when duration
or meat probe are used.
If Duration exceeds 25 minutes, the heaters
and fan are turned off 5 five minutes before
End Time and audible alert.
If meat probe is used, heaters are turned off
at 2°C below the set temperature. If the tem-
perature does not rise within 2 minutes, the
target temperature is raised by 1°C (-1°C of
the set temperature). If the target tempera-
ture is not reached with the next three min-
utes, it is raised 1°C and programme ends
(the appliance assume the set temperature
has been reached).
4. Display brightness.
"Select display mode" is displayed on the
left. Available options are displayed on the
right: Operation, Standby, Night. When you
confirm, you will see "Operation display
brightness" or "Standby display brightness"
28
Advertenties
Hoofdstukken
