Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Timed operation.
Timed operation involves setting the dura-
tion after which the appliance automatically
turns off. You can set the duration from 1
minute to 10 hours.
Touch
twice to adjust Duration (Kitchen
Timer settings are shown first and then Du-
ration). The
symbol indicator flashes and
"0:00" is shown (or, if the function has been
previously activated, the remaining duration
until the oven turns off). Touch
adjust settings. Touch
to abort and keep previous settings or touch
to confirm Duration and start countdown.
The
symbol is shown. The
and End Time flash for 5 seconds, then the
symbol goes out and the display shows
current time.
You can independently set the timer and
heating functions. You can also change the
heating functions while timer is counting
down. The Timer continues to count down
regardless of whether any of the heating
function is activated. The fast heat-up func-
tion does not affect the timer either.
You can deactivate the timer by setting the
duration to 0:00.
Once duration has elapsed, you will hear
an [end] beep. All heating elements are dis-
connected. You can silence the alarm as
follows:
- touch any sensor once to reset all function
settings, temperatures and to turn on light
for 30 seconds;
- touch
twice to set the new duration and
continue cooking with currently set tempera-
ture and settings.
Automatic operation
You can set the appliance, so that its timed
operation is delayed and cooking ends at a
specific time.
You must first set the Duration (same as in
timed operation). Touch
All manuals and user guides at all-guides.com
or
or do nothing for 5s
symbol
to confirm the
set Duration. The
the
symbol starts flashing. The display
will show the End Time (calculated as Start
Time + Duration). Touch
to move the End Time forward (and delay
Start Time). Touch
,
or do nothing for 5 seconds to abort or
touch OK to confirm. Once End Time is con-
firmed the
ily and the Current Time is shown again.
to
The
and
countdown to Start Time. Once the count-
down is complete, the
and the appliance turns on heating for the
set Duration.
Touch
to view and modify the set dura-
tion.Touch the sensor once to set the Kitch-
en Timer, touch it again to set Duration and
touch it the third time to set the End Time
Set Duration to 0:00 to erase both Duration
and End Time.
You can adjust End Time from (Current Time
+ Duration + 1 minute) to (Current Time +
Duration + 10 hours). You can modify Du-
ration (when End Time is set) from 0:00 to
(Duration – Current Time – 1 minute).
Duration countdown
The appliance counts down duration. Cur-
rent Duration is shown on the bottom line
and accompanied by the [duration symbol
]. The duration is cleared when the appli-
ance is in standby.
During
timed
grammes or timer) the time remaining to
the next stage is shown (no
the time remaining to Start Time and to End
Time. Touch and hold
view elapsed time. Touch and hold for 3 sec-
onds again to view remaining time.
23
symbol lights up and
within 5 seconds
or
to adjust. Touch
and
symbols light up stead-
indicators are on during the
symbol goes off
operation
(pre-set
symbol) i.e.
for 3 seconds to
pro-
Advertenties
Hoofdstukken
