Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Child Lock
Child lock is designed to prevent children from
changing the oven settings. Once the child
lock is activated the oven stops responding
to any controls except the unlocking com-
bination.
You can activate the Child Lock (lock the
touch sensors) at any time. Touch and
activate and
and to deactivate the Child
Lock. The Child Lock symbol
on the display.
When Child Lock is active touching any
control will cause an [error] beep, even the
and when touched separately. Active touch
sensors:
- touch
and
to deactivate Child Lock;
- touch
to enter standby.
When the oven is in standby mode and
the child lock is enabled, the
is inactive.
Door
Oven door must be closed during operation.
If the door is opened during appliance oper-
ation, the heating elements are disconnect-
ed and the light is on. If the door is open
for more than 30 seconds, you will hear
an acoustic signal alerting you to an open
door. Touch any sensor or close the door to
silence the alarm. Opening the door does
not affect any temperature or time settings,
however if the door remains open for more
than 10 minutes, the appliance cancels all
programmes.
Limit the operating time
If the oven operates any heating function for a
long time, heating elements are disconnected
to ensure safety as shown on the example
below. The appliance switches to standby
when programme is completed.
Example: If oven cavity temperature is 200°C
heater are turned off after about 3 hours. At a
temperature of 100°C after about 10 hours.
This prevent overheating.
All manuals and user guides at all-guides.com
will be shown
sensor
Pre-set programmes
Pre-set programmes are pre-defined heat-
ing functions including temperature and
times to specific cooking applications. You
can adjust pre-set programme temperature
and time. Adjusting Kitchen Timer does not
affect a pre-set programme.
to
Menu navigation:
,
– go to another menu item; menu
items are rotated in a loop;
OK – confirm;
– open pre-set programmes menu (clear
unconfirmed settings)
– open heating functions menu (clear un-
confirmed settings)
– open timer menu (clear unconfirmed
settings);
– go back. If you are on the main screen
– clear settings and enter operating mode.
[do nothing for 20s] - if you do nothing for 20
seconds, settings are cleared and the appli-
ance enters operating mode.
Select a pre-set programme.
Touch
to select a pre-set programme.
The current oven setting will be cleared, the
heaters turned off, and you san select a pre-
set programme.
The text display (left) shows the message
"Select programme group >" and ">" is blink-
ing. On the right side available programme
groups are displayed:
Meat
Poultry
Pizza;
Frozen products
Pastries
Low temperature baking
Additional programmes
When you confirm, the selected group is
displayed on the left side. ">" continues to
flash. Pre-set programmes within the select-
24
Advertenties
Hoofdstukken
