Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Light
The
sensor operates independently and
using it does not affect other functions and
settings.
sensor is inactive in a standby
mode.
The light in the oven turns on:
- when you touch
- when you touch and hold
the appliance enters standby mode,
when you use any heating function or a pre-
set programme — for 30s;
when "fast heat-up" completes — for 30s;
when you open the door — until the door is
closed, but no longer than for 10 minutes.
Touch
to turn off the light at any time.
Cooling fan.
Cooling fan operates independently of the
set functions and the appliance status.
Cooling fan turns on when the oven cham-
ber temperature exceeds 50°C and turns off
when it is below this temperature.
Thermostat
Thermostat symbol (next to the oven tem-
perature) indicates the operating status of
heaters. If any of the heating elements op-
erates, the
symbol lights up. The symbol
goes out, if none of the heating elements
operates (e.g. when the oven reaches the
desired temperature and the heating ele-
ments are disconnected until the tempera-
ture drops).
All manuals and user guides at all-guides.com
— for 30 seconds;
for 3s – until
Heating functions
Touch
to select heating functions. You
can use the following controls:
– open pre-set programmes menu (clear
unconfirmed settings);
– open timer menu (clear unconfirmed
settings);
– go back. If you are on the main screen
– clear settings and enter operating mode.
,
– navigate the menu;
OK – confirm.
[do nothing for 20s] - if you do nothing for 20
seconds, settings are cleared and the appli-
ance enters operating mode.
The text display (left) shows the message
"Select heating function >" and ">" is blink-
ing. Heating functions are displayed se-
quentially. The default function is Fan cook-
ing. Note: Rotisserie functions only appear
on appliances that feature rotisserie. Out of
the three cleaning function available only
the active function is displayed, depending
on the pyrolysis settings.
In addition to accompanying functions, dif-
ferent oven chamber outline symbols are
displayed reflecting the selected heating
function. Touch
OK to confirm.
Once your selection is made, it is displayed
on the left side while the right side is blank.
The default oven temperature flashes.
Touch
or
then OK to confirm.
If meat probe is detected, the appliance will
ask you to select its temperature. Touch
or
to adjust default meat probe tempera-
ture of 80°C and then OK to confirm.
This step is omitted if no meat probe is de-
tected.
18
or
to select and then
to adjust temperature and
Advertenties
Hoofdstukken
