Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SETTINGS
Setting the acoustic signal and lock parameters
You can adjust the volume of the acoustic signal, duration of acoustic alarm,
and automatic lock settings.
Activate the setting menu:
1. Switch off the appliance.
2. Touch and hold the pause key for approx. 3 seconds.
▷
The first parameter "Uo" will appear on the timer display, indicating the volume
(loudness) of acoustic signals.
3. Touch the timer key (several times) to select the type of parameter:
•
Uo - acoustic signal and alarm volume (loudness)
•
So - alarm duration
•
Lo - Automatic lock
•
Po - Total maximum power
The currently set value will appear on the right cooking zone power level displays.
▷
4. Touch the '-' or '+' keys from the front right cooking zone to adjust the value.
5. Touch and hold the pause key for 2 seconds to confirm and store all parameters.
A short acoustic signal will sound.
▷
6. Touch the On/Off key to close the settings mode (if you do not wish to store the new
parameter settings).
Acoustic signal and alarm volume (loudness) 'Uo'
The following values can be set:
00 on the display = off (does not apply to alarm and error acoustic signal)
▷
01 on the display = minimum volume
▷
▷
02 on the display = medium volume
03 on the display = maximum volume (default)
▷
•
The first digit appears on the right rear display and the second digit on the right front
display.
•
A short acoustic signal will be sounded upon every change, with the newly set volume.
Acoustic alarm duration 'So'
The following values can be set:
05 on the display = 5 seconds
▷
▷
1.0 on the display = 1 minute
2.0 on the display = 2 minutes (default)
▷
EN 18
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
