Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Boost function
You can use the boost function to cook at the highest power level during a short period of time
(max. 10 minutes). After the maximum boost time the power will be reduced to setting 9.
1. Switch on the hob and place a suitable pan on the cooking zone.
2. Touch the '+' key of the desired cooking zone.
'9' shows on the display.
▷
3. Touch the '+' key of the desired cooking zone again to select the boost function.
▷
'P' shows on the display.
After the maximum boost time the power will be reduced to power level 9.
▷
Connect the bridge induction cooking zones
The Bridge induction zones can be connected to each other. This creates one large zone that can
be used, for example, a grill plate or a large fish pan on the same power. If the Bridge induction
zones are connected, they cannot be set to boost. The pan has to be large enough to cover the
centres of the front and rear cooking zone.
Connect the bridge induction cooking zones
1. Press the On/Off key.
2. Simultaneously touch and hold (for 4 seconds) the '-' keys from both the left-hand side
cooking zones.
The 'bridge cooking zone indicator' will appear on the rear zone display to indicate that
▷
the two cooking zones are connected.
3. Set the desired cooking power for both the connected cooking zones with the '-' and '+'
keys of the front cooking zone.
Timer control
You can use the timer in two ways:
•
Minute minder — no cooking zone will be switch Off after the set time has elapsed. Only
an alarm will sound.
Press any key to stop the alarm.
▷
•
Cooking-timer — the timer is connected to an active cooking zone. After the set time has
elapsed, the cooking zone will switch off automatically.
EN 13
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
