Advertenties
Beschikbare talen
Beschikbare talen
>
To switch the function off again, press the Repeat track button as often as
required until the icon no longer appears.
>
Press the Shuffle button (5) to play the tracks in a random sequence.
14.7 Programming playback
You can programme up to 20 tracks on a CD in any sequence.
>
Stop any playback in progress by pressing the STOP button
>
Press the PRESET button on the remote control, or 5+ on the device to
access the programming mode.
The display now shows [P01] for the first track to be programmed.
>
Using the
accept the storing.
>
Then [PO2] is displayed for the second track which you can also add as
described above.
>
When programming is complete, press the Playback/Pause button
To delete programming, either press Stop
the Eject button.
15 Audio input
You can play sound on an external device via the DIGITRADIO 380 CD IR speaker.
>
Connect the external device to the AUX-IN port (16, 3.5 mm stereo jack) on
the back
>
Use the MODE button to select the audio input. [Aux-In] appears on the
display.
The playback is controlled on the external device. Do not set the volume too
low to prevent interference.
16 Other functions
16.1 Sleep function
>
Press the MENU button and then select [Main Menu > Sleep].
>
You can use the or buttons to set the period for Sleep off in 15, 30, 45
or 60 minute intervals, after which the device switches to standby while in
any operating mode.
/
buttons, select a track and press the OK button to
.
2x or open the CD tray using
.
DE
EN
FR
NL
65
Advertenties
