B
Using the appliance
Levelling
• The washing machine should be installed on a firm, level surface (use a spirit level if
necessary)� If you want to install the washing machine on a wooden floor, spread the weight by
placing a 60x60 cm plywood board, that is at least 3 cm thick, under the machine and secure
the board to the floor� If the ground is uneven, adjust the four adjuster feet as needed; do not
insert wooden blocks under the feet�
5� Unscrew the lock nut by turning it clockwise (see arrow) using the spanner�
6� Raise the machine slightly and adjust the height of the feet by rotating them�
Higher
Lower
7� Important: tighten the lock nut by turning it anticlockwise in relation to the machine�
8
EN