Download Print deze pagina

VALBERG WF 1014 A W180C3 Gebruiksaanwijzingen pagina 46

Advertenties

Beschikbare talen

Beschikbare talen

C
Useful information
• The position of the separator in the main wash compartment is suitable for the use of
washing liquid or powder (see Washing Product section)�
The machine vibrates during the spin cycle. Check that:
• The washing machine is correctly levelled and is resting correctly on its four feet;
• The transit bolts have been removed� Before using the machine, the transit bolts must be
removed�
The final spin is not producing satisfactory results.
• The washing machine is fitted with a system for detecting and adjusting unbalances�
If heavy clothing (e�g� : bathrobes) is placed in the washing machine, the system is able to
automatically adjust the spin speed or even stop a spin cycle, that has begun, if it detects an
unbalance that is too high� This is to protect the appliance�
• If the laundry is still too wet at the end of the cycle, remove some items and restart the
spin cycle�
• Excessive foam can prevent the spin cycle� Use a suitable amount of detergent�
• Check that the Spin mode speed selector has not been set to "0"�
If the washing machine has a time display: the duration of the program initially displayed
is increased/decreased by time intervals:
This is normal and allows the machine to automatically adjust the duration of the program
depending on various factors e�g� :
• Excessive foam;
• Load unbalances due to the presence of heavy items;
• Longer heating times due to the low temperature of the inlet water�
In view of these factors, the remaining duration of the program is recalculated and adjusted
as necessary� What's more, during the filling phase, the washing machine works out the load
level and, if necessary, adjusts the initially displayed program duration accordingly� During
these updates, an animation scrolls across the duration display�
39
EN

Advertenties

loading

Deze handleiding is ook geschikt voor:

974906