Advertenties
Beschikbare talen
Beschikbare talen
B
Connecting the water inlet hose
9� If the water inlet hose is not already installed, it must be screwed into the washing machine�
The hose with the blue mark is for supplying cold water only�
10� Screw the inlet hose onto the tap by hand and tighten the nut�
CAUTION:
• Do not make a knot in the hose!
• The washing machine must not be connected to the
mixer tap of a non-pressurised water heater.
• Check that the connections are watertight by turning
the water tap on fully.
• If the hose is too short, replace it with a pressure-
resistant hose of adequate length (1000 kPa min,
compliant with the EN 50084 standard).
• Regularly check the inlet hose for any weakness or
cracks, and replace it if necessary.
• The washing machine may be connected without a
non-return valve.
Using the appliance
11
Cool
EN
Advertenties
