Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Emtying the ashpan
The toilet has a default setting that reminds you to empty your ashpan after 50 flushes. When this
is needed, the message "ashpan emptied?" is shown on the display, press YES or NO. If you have
not emptied the ash and answer NO, you can still use the toilet, but the message will appear again
the next time you use it, until the ash is emptied and the user answers YES.
NOTE! Not emptying the ashpan in time can seriously reduce the efficiency of the incineration and in the
worst case cause damage to the toilet, e.g. the element.
In order to emty the ashpan, do the following:
1. Remove the front plate
2. Turn the handle to the middle
3. Pull out the ashpan
4. Emty into the trash or the flower bed (the ash is completely free from bacteria)
5. Push the ashpan back in and turn the handle to the right until it stop
6. Put the front plate back
It is important to push the ashpan all the way in, keep holdning it in all the way while turning it all
the way to the right. If this is not done, there may be a gap between the ashpan and the incinera-
tion chamber, which means that the toilet does not reach full heat.
EN-21
Advertenties
Hoofdstukken
Inhoudsopgave
