Advertenties
Beschikbare talen
Beschikbare talen
* If "Off" is selected in step
adjust the subwoofer phase.
C
Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off:
All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E
Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Storing your own sound modes
You can adjust the sound modes and store your own
adjustments in memory.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
2
Select a sound mode.
Downloaded from Caradio-Manual.com Manuals
44
All manuals and user guides at all-guides.com
2
3
, you can only
4
5
6
Preset value setting for each sound mode
Select a frequency range to adjust.
Adjust the sound elements of the selected
frequency range.
4
¢
1
Press
/
frequency band, then press
enhanced level for the selected frequency
band. [–6 to +6]
2
Press number button 5 (
the control dial to select the frequency.
3
Press number button 5 (
the control dial to select the quality slope (Q).
Repeat steps 3 and 4 to adjust the other
frequency bands.
Store the adjustments.
Preset value
Sound
mode
USER
0
0
ROCK
+3
+2
CLASSIC
+2
+2
POPS
0
+1
HIP HOP
+4
+1
JAZZ
+3
+2
to select the
5
∞
/
to
), then turn
), then turn
0
0
0
0
+1
+1
0
+1
0
0
+1
+2
–2
0
+1
+1
+2
+2
Advertenties
