Advertenties
Beschikbare talen
Beschikbare talen
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
1
2
3
4
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For "EQ" setting, see above.
3
Adjust the selected setting item.
A
Fad/Bal (Fader/Balance)
1
Press number button 1 (
to move to the "Fad/Bal" adjustment
display.
2
Adjust the speaker output balance by
pressing:
5
∞
/
: between the front and rear
speakers. [F6 to R6]
Downloaded from Caradio-Manual.com Manuals
All manuals and user guides at all-guides.com
Enter the setting menu.
Select "EQ."
Select "On."
• If "Bypass" is selected, you can listen to the original
Select a preset sound mode.
)
sound mode recorded.
display.
4
¢
/
right speakers. [L6 to R6]
B
Subwoofer
1
Press number button 1 (
move to the "Subwoofer" adjustment
display.
4
¢
2
Use
/
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4
Press number button 1 (
move to another setting level.
4
¢
/
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
Continued on the next page
lights up on the
: between the left and
) to
to select a cutoff
) to
: select the quality of
SETTINGS
43
Advertenties
