Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTE: You can use the LED work light
even when the product is not in use. Set the
rotation direction switch
position. Switch the LED work light on/off
according to above description.
˜ Cleaning and maintenance
Before cleaning or carrying out any
o
maintenance:
–
Set the rotation direction switch
to the middle position. This prevents
unintentional switching on.
–
Remove the USB cable
–
Remove the bit
holder
or any of the attachments
[
]
.
[
]
[
]
[
]
–
Disconnect the charger
socket-outlet.
Never allow fluids to get into the product.
o
The product must always be kept clean, dry
o
and free from oil or grease.
Remove debris from it after each use and
before storage.
Regular and proper cleaning will help
o
ensure safe use and prolong the life of the
product.
Clean the product with a dry cloth. Use a
o
soft brush for areas that are hard to reach.
In particular clean the air vents after every
o
use with a cloth and soft brush.
The vents must always be clear.
o
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
20 GB/IE/NI
[
8 ]
to the middle
5 ]
[
[
5 ]
.
[
]
, the magnetic bit
[
]
[
from the
[
]
˜ Maintenance
Before and after each use: Check the
o
product and the following accessories for
wear and damage:
–
Magnetic bit holder
[
]
–
Screw bits
[
]
–
Torque attachment
[
]
–
Eccentric attachment
[
]
–
Angle attachment
[
]
–
Cutting attachment
[
]
If required, exchange the accessories for
new ones:
–
see "Changing bits and magnetic bit
holder"
]
–
see "Replacing the cutting blade"
Observe the technical requirements of the
accessories (see "Technical data").
˜ Storage
Set the rotation direction switch
o
middle position. This prevents unintentional
switching on.
Store the product in a dry indoor location
o
protected from direct sunlight.
Store the product in its carrying case
o
˜ Transportation
This product contains a Li-Ion rechargeable
o
battery and is therefore subject to
hazardous materials regulation. Users
may transport the product with built-in
rechargeable battery on roads or by sea
without special requirements.
The packaging and marking is subject to
o
special requirements when it is transported
by third parties (e.g. airline, courier,
carrier). A hazardous materials expert must
be consulted when transported by third
parties.
NOTE: The integrated Lithium-Ion battery
may only be removed by trained or
qualified personnel.
to the
5 ]
[
.
[
]
Advertenties
Hoofdstukken
Inhoudsopgave
