Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Do not use a battery pack for
e)
tool that is damaged or modified.
Damaged or modified batteries exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack
f)
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion.
Follow all charging instruction and
g)
do not charge the battery pack
or tool outside the temperature
range specified in the instruction.
Charging improperly or at temperatures
outside the specified range may damage
the battery and increase the risk of the fire.
CAUTION! RISK OF
EXPLOSION!
Never charge
non-rechargeable batteries!
Protect the rechargeable battery
max. 50°C
from heat, for example from
continuous exposure to sunlight, fire,
water and moisture.
There is a risk of explosion.
Service
Have your power tool serviced
a)
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
Never service damaged battery
b)
packs. Service of battery packs should
be only be performed by the manufactured
or authorized service providers.
14 GB/IE/NI
˜ Safety guidelines for
screwdrivers
Hold the power tool by the
a)
insulated gripping surfaces, when
performing an operation where
the fastener may contact hidden
wiring. Fasteners contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
Secure the workpiece. A workpiece
b)
securely held by a clamping device or vice
is much safer than one held in your hand.
Hold the power tool firmly. High
c)
reaction moments can occur for brief
periods while lightening and loosening
screws.
Switch the power off immediately
d)
if the tool blocks while in use. Be
prepared for high reaction moments as
these can cause kickback.
While working on the appliance,
e)
transporting it or storing it,
always set the rotation direction
switch to the central position (lock
position). This prevents the power tool
from starting up unintentionally.
˜ Safety guidelines for using
cutting attachment
Keep your hands clear of the cutting area
and the cutting blade.
Before carrying out any work on the
appliance, ensure that the rotation direction
switch is in the middle. This prevents
unintentional switching on.
Do not cut unless the blade guard is fully
functional. Defective blade guards will not
protect you against unintentional contact
with the cutting blade.
Before each use, check whether the blade
guard is in perfect condition and that the
cutting blade is firmly fitted.
Always use cutting blades of the correct
size and with an appropriate central fixing
bore.
Advertenties
Hoofdstukken
Inhoudsopgave
