The appliance is suitable for
indoor use only.
Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
Injuries and damage to property due to
broken accessory tools or the sudden
impact of hidden objects during use.
Danger of injury and property damage
caused by flying objects.
NOTE
This product produces an electromagnetic
u
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury,
we recommend persons with medical
implants to consult their doctor and the
medical implant manufacturer before
operating this product!
Use
Battery information
The built-in battery is supplied partially
o
charged. Li-Ion batteries can be charged at
any time without adversely affecting their
service life. Interruption of the charging
process will not damage the battery.
If the battery status LED
o
during use, the battery is at less than 30 %
of its capacity and needs to be charged.
16 GB/IE/NI
lights up red
3 ]
[
Never charge the product when the
o
ambient temperature is below +4 °C
or above +40 °C. The storage climate
should be cool and dry and the ambient
temperature should be between 0 °C and
+50 °C.
This product has a built-in rechargeable
o
battery which cannot be replaced by the
user. The removal or replacement of the
rechargeable battery may only be carried
out by the manufacturer or his customer
service or by a similarly qualified person in
order to avoid hazards. When disposing
of the product, it should be noted that this
product contains a rechargeable battery.
Start charging
(Fig. B)
Connect the USB cable
o
(Type A)
of the charger
[
]
Connect the other end of the USB cable
o
to the USB Type C socket
Connect the charger
o
The battery status LED
o
charging status:
Battery status
LED
3 ]
[
Red
Green
NOTE: It is normal for the handle to warm
up slightly whilst charging.
Stop charging
Disconnect the USB cable
o
product.
Disconnect the charger
o
outlet.
to the USB port
[
]
.
[
]
[
.
6 ]
[
to a socket-outlet.
[
]
shows the
3 ]
[
Charging status
Charging
Battery is charged up
from the
[
]
from the socket-
[
]
]