Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Changing rotary direction
Push through the rotation direction
o
switch
to set the rotary direction
[
5 ]
(Fig. C):
Switch
Direction
pushed from
Tighten
Right
(b)
screws
Loosen
Left
(a)
screws
˜ Changing bits and magnetic
bit holder
Pull out the bit
. Insert another type of bit
[
]
o
into the bit holder
holder
(Fig. D).
[
]
NOTE: Screw bits are labelled according
to their dimensions and their shape. If you
are unsure, always try the particular screw
bit out to see whether it sits in the screw
head without any free play.
˜ Front cover
The front cover
can be removed for
9 ]
[
attaching other attachments (Fig. E).
˜ Choosing an attachment
Torque attachment
Use
Low torque:
Small screws
o
Screwing into soft materials
o
High torque:
Large screws
o
Screwing into hard materials
o
Eccentric attachment
Use
Tighten and loosen screws that are
close to the ceiling or an adjacent
wall
Direction
indicator
2 ]
[
4 ]
[
or the magnetic bit
1 ]
[
Fig. F
[
]
Fig. H
[
]
Angle attachment
Use
Tighten and loosen screws at an
angle of 90°
Cutting attachment
Use
Cutting soft materials
Examples:
Corrugated paper
o
(max. thickness: 5 mm)
Drapery
o
Leather (max. thickness: 3 mm)
o
˜ Installing attachments
Align the attachment (e.g. torque
attachment
) with the bit holder
[
]
the attachment in direction c till completely
engaged to the product. When you hear a
click sound, the attachment is properly installed
(Fig. F).
˜ Dismantling attachments
Press down the lock buttons
attachment out of the product in direction d
(Fig. F).
NOTES:
The following attachments can be installed
o
and dismantled in the same way as
mentioned above:
–
Eccentric attachment
–
Angle attachment
–
Cutting attachment
Attachments can be installed to the product
o
in steps of 45°.
Fig. I
[
]
Fig. J
[
]
. Push
1 ]
[
, then pull the
[
]
[
]
[
]
[
]
GB/IE/NI
17
Advertenties
Hoofdstukken
Inhoudsopgave
