Inhoudsopgave
Advertenties
Manifolds
1. Inlet manifold
2. Butterfly valve spindle
3. Bearing bush
4. Washer
5. Butterfly valve
6. Stop bolt
7. Nut
INSTRUCTIONS FOR REPAIR
Inlet and exhaust manifolds should be fitted free from stress. After renewing the exhaust manifold gaskets, run the
engine until reaches operating temperature and immediately thereafter retighten manifolds nuts with prescribed
torque (3.8 - 4.2 mkg = 27 - 29 ft.lbs)
EN-08-70
Recovered by ms Roboot - www.roboot.nl
8. Stud
9. Washer
10. Spring washer
11. Nut
12. Stud
13. Washer
14. Nut
61
Werkplaatsinstructies DAF DD 575 - DS 575
15. Lock pin
16. Lock ring
17. Exhaust manifold, front part
18. Exhaust manifold, rear part
19. Connecting tube
20. Gasket
Advertenties
Inhoudsopgave
