Problem
Traces of rust on cutlery.
There are residues of deter‐
gent in the dispenser at the
end of the programme.
Odours inside the appliance.
Limescale deposits on the ta‐
bleware, on the tub and on the
inside of the door.
Dull, discoloured or chipped
tableware.
Refer to "Before first use",
"Daily use" or "Hints and
tips" for other possible causes.
TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Possible cause and solution
•
There is too much salt in the water used for washing.
Refer to "The water softener".
•
Silver and stainless steel cutlery were placed together.
Avoid to put silver and stainless steel items close togeth‐
er.
•
The detergent tablet got stuck in the dispenser and
therefore was not completely washed away by water.
•
Water cannot wash away the detergent from the dis‐
penser. Make sure that the spray arm is not blocked or
clogged.
•
Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
•
Refer to "Internal cleaning".
•
The level of salt is low, check the refill indicator.
•
The cap of the salt container is loose.
•
Your tap water is hard. Refer to "The water softener".
•
Even using multi-functional tabs use salt and set regen‐
eration of the water softener. Refer to "The water soft‐
ener".
•
If lime scale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
•
Try different detergent.
•
Contact the detergent manufacturer.
•
Make sure that only dishwasher-safe items are washed
in the appliance.
•
Load and unload the basket carefully. Refer to basket
loading leaflet.
•
Place delicate items in the upper basket.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
bar (minimum and maximum)
MPa (minimum and maximum)
Progress 41
596 / 818 - 898 / 550
220 - 240
50
0.5 - 8
0.05 - 0.8