Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
38 Progress
arrow and simultaneously turn it
counterclockwise until it locks into
place.
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
TROUBLESHOOTING
If the appliance does not start or it stops
during operation, before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with the
help of the information in the table.
WARNING! Repairs not
properly done may result in
serious risk to the safety of the
user. Any repairs must be
performed by qualified
personnel.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a
soft damp cloth.
• If you use short duration programmes
regularly, these can leave deposits of
grease and limescale inside the
appliance. To prevent this, we
recommend running long duration
programmes at least twice a month.
• To maintain the performance of your
appliance at its best, we recommend
using a specific cleaning product for
dishwashers (at least once a month).
Follow carefully the instructions on the
packaging of the product.
With some problems the end indicator
flashes intermittently indicating a
malfunction.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.
Possible cause and solution
•
Make sure that the mains plug is connected to
the mains socket.
•
Make sure that there is no damaged fuse in the
fuse box.
•
Make sure that the appliance door is closed.
•
If the delay start is set, cancel the setting or wait
for the end of the countdown.
•
The appliance has started the procedure to re‐
charge the resin inside the water softener. The
duration of the procedure is approximately 5 mi‐
nutes.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
