Intermediate Positions I + Ii; Setting The Desired Intermediate Position; Travelling To The Desired Intermediate Position; Deleting The Desired Intermediate Position - Becker Centronic VarioControl VC360-II Montage- En Gebruiksaanwijzing

Draadloze ontvanger dc solar

Inhoudsopgave

Advertenties

Beschikbare talen

Intermediate positions I + II

The intermediate positions I + II are freely selectable posi-

tions for the shading solution between the two limit posi-

tions. Each travel button can be assigned one intermediate

position. Both limit positions must be set before an interme-

diate position is set.

When both or individual limit positions are deleted, both in-

termediate positions are deleted as well.

Travel the shading solution from the corresponding limit position to the de-

sired intermediate position.

Now press the STOP button and, within 3 seconds, also press the travel button

of the corresponding limit position and hold the two buttons down.

▻ The receiver confirms.

► The intermediate position is now saved.

Press the travel button for the desired intermediate position twice within one

second.

► The curtain runs to the intermediate position assigned to the travel but-

ton.

Move the shading solution to the intermediate position that is to be deleted.

Now press the STOP button and, within 3 seconds, also press the travel button

assigned to the intermediate position and hold the two buttons down.

▻ The receiver confirms.

► The intermediate position is now deleted.

36 - en

Inhoudsopgave

Advertenties

Inhoudsopgave