Explanation Of Functions; Programming The Transmitter; Putting The Radio Receiver Into Programming Mode - Becker Centronic VarioControl VC360-II Montage- En Gebruiksaanwijzing

Draadloze ontvanger dc solar

Inhoudsopgave

Advertenties

Beschikbare talen

The red charging voltage indicator lamp lights up during the

charging process. The battery is fully charged after approx.

2 hours.

Explanation of functions

You can switch between roller shutter / screen operation and venetian blind

operation.

Roller shutter / screen operation (factory setting)

By pressing a travel button, the roller shutter / screen moves to the set limit

position in maintained operation mode.

Venetian blind operation

For venetian blind operation, you can operate the receiver in touch mode. If

you press the travel button for longer than 1 second, the venetian blind runs in

maintained operation mode.

a) Putting the radio receiver into programming mode by switching on

the power

Switch on the power.

▻ The indicator lamp (green) shows the device is ready for program-

ming.

► The radio receiver remains in programming mode for 3 minutes.

b) Putting the radio receiver into programming mode with the program-

ming button

Press the programming button for 3 seconds.

▻ The indicator lamp (green) shows the device is ready for program-

ming.

► The radio receiver remains in programming mode for 3 minutes.

31 - en

Inhoudsopgave

Advertenties

Inhoudsopgave