Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Ontvangers
  5. Centronic VarioControl VC360-II
  6. Montage- en gebruiksaanwijzing

Checking That The Running Direction Is Correct; Changing Direction Of Rotation Via Master Transmitter; Switching Between Roller Shutter / Screen Operation And Venetian Blind Operation - Becker Centronic VarioControl VC360-II Montage- En Gebruiksaanwijzing

Draadloze ontvanger dc solar
Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Checking that the running direction is

Changing direction of rotation via master transmitter

It is only possible to change the rotation direction within 15
minutes after switching on the power.
Press the UP or DOWN button
▻ The shading solution runs in the desired direction.
► The running direction is OK.
If the shading solution runs in the wrong direction, the running direction
must be changed. Proceed as follows:
Switching between roller shutter /
screen operation and venetian blind
Press the programming button for 3 seconds until the receiver confirms.
Then press the programming button and also the UP/STOP/DOWN buttons for
10 seconds until the receiver confirms.
The switching process is now complete.
correct
First press the programming button and, within
the next 3 seconds, press both the UP and DOWN
3x
buttons for 3 seconds.
► The receiver confirms.
Check the running direction again.
operation
33 - en

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker Centronic VarioControl VC360-II

Gerelateerde Producten voor Becker Centronic VarioControl VC360-II

Inhoudsopgave