Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
7. OPERATIONAL SAFETY REQUIREMENTS
Before starting operation, study safety requirements. Follow all the requirements
of the present Manual.
Getting started the machine usage, operator should consider his physical condition, level of
qualification and complexity of the tasks performed. Machine operation is allowed only for
personnel of legal age having studied the present operating manual.
IT'S PROHIBITED TO:
• perform operation being intoxicated;
• operate the machine under the exposure of water drops and splashes as well as in open
areas in the rain or snow;
• leave the machine connected to power line unattended;
• assign the machine operation to persons unable to use it properly;
• use the machine other than intended;
• process metals, asbestos-cement materials, stone, plastic, rubber etc.
IT'S PROHIBITED TO operate the machine in case of detection of any of the following
malfunctions during operation:
• damage of electrical cord or plug connection;
• damage of grounding circuit;
• detection of flaming insulation smell or smoke;
• switch malfunction;
• generation of noise, knocking or vibrations;
• malfunctions or cracking of machine parts, guards or casings.
The machine should be shut down in case of sudden stop (moving parts wedging etc.). During
work breaks the switch should be covered.
When connecting the machine use automatic circuit breaker or cutout fuse with rated
operating current of 16 A.
The machine should be unplugged from power line in the following cases:
• tools replacement (circular saw blade and knives), attachments mounting and adjustment;
• moving the machine from one place to another;
• during work breaks or after operation;
• during maintenance;
• when removing chips and saw dust.
Electrical cord of the machine should be protected from occasional damage (it's recommended
to hang it). Direct contact of electrical cord with hot or oiled surfaces is not allowed.
When operating in open areas use only appropriate and properly marked extension cord.
Always make sure that processed material is free from nails or other foreign objects.
Do not wear loose clothes and jewelry. It's prohibited to wear gloves during operation as they
may be entangled by moving machine parts. Use personal protective equipment and head
wear.
To provide high-quality and safe operation, cutting parts of working tools should be sharpened
and clean. To replace the equipment, follow the present operating manual.
12
Advertenties
Hoofdstukken
Inhoudsopgave
