Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.3 Pre-set backrest
Backrest angle (Fig. 4.8)
1. Turn (A) in order to adjust (B).
NOTE / CAUTION!
Do NOT use an electric tool for this adjustment.
Backrest angle home position of reclining back (Fig.4.9 - 4.10)
1. Adjust the back to the required angle with the controller.
2. Remove bolts (A+B) and rotate (C).
3. Remove cover (D)
4. Remove 2 screws to remove actuator cover (E).
5. Loosen (F) by one turn.
6. Adjust the endstop to the maximum position.
7. Tighten (F).
NOTE / CAUTION!
After removing bolt (B) the backrest must be held, otherwise it
would fall forwards or backwards.
Backrest height with fixed back (Fig. 4.11)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
10
B
A
1
1
B
L+R
A
L+R
4
F
B
2
A
Sedeo Pro | Rev.F | English
Fig. 4.8
1
M5
Fig. 4.9
C
2
D
Fig. 4.10
3
E
Fig. 4.11
M5
1
M5
3
Advertenties
Hoofdstukken
Inhoudsopgave
