Deleting Transmitters - Becker Centronic VarioControl VC120 Montage- En Gebruiksaanwijzing

Draadloze ontvanger voor rolluiken en cassetteschermen

Verberg thumbnails

pagina van 72

/ 72
Inhoud
Inhoudsopgave
Bladwijzers

Inhoudsopgave

Advertenties

Beschikbare talen

Now press the STOP button and, within 3 seconds, also press the

travel button assigned to the intermediate position and hold the two

buttons down.

[ The shading solution shifts to confirm.

Æ The intermediate position is now deleted.

Deleting individual transmitters

Note

The programmed master transmitter cannot be de‐

leted. It can only be overwritten (see Programming

the master transmitter).

Press the programming button on the master transmitter for 3 sec‐

onds.

[ The shading solution shifts to confirm.

Now press the programming button of the transmitter to be deleted

for 3 seconds.

[ The shading solution shifts to confirm.

Then re-press the programming button of the transmitter to be de‐

leted for 10 seconds.

[ The shading solution shifts to confirm.

Æ The transmitter is now deleted from the receiver.

Deleting all transmitters (except the master transmit‐

ter)

Press the programming button on the master transmitter for 3 sec‐

onds.

[ The shading solution shifts to confirm.

Re-press the programming button on the master transmitter for 3

seconds.

[ The shading solution shifts to confirm.

Re-press the programming button on the master transmitter for 10

seconds.

[ The shading solution shifts to confirm.