Intermediate Positions I + Ii; Setting The Desired Intermediate Position; Deleting The Desired Intermediate Position - Becker Centronic VarioControl VC120 Montage- En Gebruiksaanwijzing

Draadloze ontvanger voor rolluiken en cassetteschermen

Inhoudsopgave

Advertenties

Beschikbare talen

Note

The intermediate positions I + II are freely selectable

positions for the shading solution between the two

limit positions. Each travel button can be assigned

one intermediate position. Both limit positions must

be set before an intermediate position is set.

When both or individual limit positions are deleted,

both intermediate positions are deleted as well.

Travel the shading solution from the corresponding limit position to

the desired intermediate position.

Now press the STOP button and, within 3 seconds, also press the

travel button of the corresponding limit position and hold the two

buttons down.

[ The shading solution shifts to confirm.

Æ The intermediate position is now saved.

Travelling to the desired intermediate position

Note

The shading solution must run to the intermediate

position from the corresponding limit position.

Press the travel button for the desired intermediate position twice

within one second.

Æ The shading solution runs to the intermediate position assigned

to the travel button.

Open/close the shading solution to the intermediate position to be

deleted.