Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Radiozenders
  5. Centronic SunWindControl SWC245-II
  6. Montage- en gebruiksaanwijzing

Programming Additional Transmitters; Installing The Wall Bracket - Becker Centronic SunWindControl SWC245-II Montage- En Gebruiksaanwijzing

5-kanaals voor windbesturing
Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

b) Programming the master transmitter
Press the programming button on the master transmitter while in program-
ming mode until the receiver confirms that programming has been successful.
The programming process is now complete.

2) Programming additional transmitters

1.
Press the programming button of the master transmitter until the re-
ceiver confirms.
2.
Then press the programming button of the new transmitter until the re-
ceiver confirms.
3.
Now press the programming button of the new transmitter again.
4.
The receiver confirms successful programming.

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
Unlocking mechanism
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
21 - en

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker Centronic SunWindControl SWC245-II

Gerelateerde Producten voor Becker Centronic SunWindControl SWC245-II

Inhoudsopgave