Explanation Of Functions; Channel Indicator Lamps - Becker Centronic SunWindControl SWC245-II Montage- En Gebruiksaanwijzing

5-kanaals voor windbesturing

Inhoudsopgave

Advertenties

Beschikbare talen

Explanation of functions

Channel

The channel of a transmitter can be programmed into one or more receivers.

One receiver is operated through an individual command, several receivers

through a group command.

Central command

If all the channels of the transmitter are selected, it is possible to operate all of

the assigned receivers/groups simultaneously.

Channel selection button

Up to 5 channels can be selected using the channel selection button. The indi-

vidual channels are indicated by the corresponding channel indicator lamp

lighting up. If all of the channel indicator lamps light up simultaneously, the

central command can be programmed or transmitted.

You can make a note of the programmed channel in the la-

belling field underneath the transparent film.

A radio signal is indicated by the corresponding channel indicator lamp light-

ing up. The respective channel indicator lamp flashes while transmitting if the

battery is getting weak. The transmission strength and the radio range de-

crease as battery power declines. If the channel indicator lamp no longer

lights up when a button is pressed, the battery must be replaced.

18 - en

Inhoudsopgave

Advertenties

Inhoudsopgave