Parkside PAT 4 D5 Gebruiksaanwijzing pagina 20
Verberg thumbnails
Zie ook voor PAT 4 D5:
- Vertaling van de originele gebruiksaanwijzing (81 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
Pull back on the pusher
Follow icon shown on pusher
magazine
4
After adding nails, slide the pusher
is fully closed, (see Fig C).
4
Release the release button
the magazine
Note: Use the window on the fill indicator
magazine
4
Functions
Stapling & Nailing
Set the On/Off switch
Press the safety contact
Squeeze the trigger
Make sure to keep the product pressed against the work piece.
Set the On/Off switch
product off.
Note: Hold tool firmly and press on work surface before firing to
ensure the complete penetration of the staple/nail.
Clearing Jammed Staples
It may otherwise accidentally be triggered after removing the staple.
Note: Set the On/Off switch
jammed staple.
Open the magazine
Remove the jammed staple from the magazine
Note: Do not trigger the staple gun when empty to prevent wear.
20 GB/IE/NI
(see Fig. B)
3
3
(see Fig. C)
. It must click and lock into place for
3a
to be closed correctly.
4
is empty.
to the "I" position to switch the product on.
8
into the work piece.
6
to drive a staple/nail into the work piece.
1
to the "0" position to switch the
8
If a staple is jammed, do not squeeze the trigger
to "0" position prior to clearing the
8
and pull back on the pusher
4
(see Fig. C) and add nails to the
in again until the magazine
3
to see if the
5
4
.
1
.
3
.
Advertenties
