Parkside PAT 4 D5 Gebruiksaanwijzing pagina 11

Verberg thumbnails Zie ook voor PAT 4 D5:

Advertenties

Beschikbare talen

Wear hearing protection!

Vibration values determined in accordance with

EN 60745:

Vibration emission value a

= 2.537 m/s

Uncertainty K = 1,5 m/s

Note: The vibration level specified in these instructions has been

measured in accordance with a standardized measuring procedure

specified in EN60745 and can be use for equipment comparisons.

The specified vibration emission value can also be used to make an

initial exposure estimate.

The vibration level varies in accordance with the use of the power tool

and may be higher than the value specified in these instructions in some

cases. Regular use of the electric tool in such a way may cause the us-

ers to underestimate the vibration. Try to keep the vibration loads as

low as possible. Measures to reduce the vibration load are, e.g. wear-

ing gloves and limiting the working time. All states of operation much

be taken into account (e.g. time when the power tool is switched off

and time where the power tool is switched on but running without load).

GB/IE/NI

Advertenties