SETTING AND STARTING A WASHING PROGRAMME
Starting the washing programme
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. To set a washing programme, press the
programme button again and again until
the related programme indicator comes
on.
3. Close the appliance door, the washing
programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while a washing
programme operates, it is necessary to
cancel the programme.
1. Open the appliance door.
2. Press and hold the programme button
until the programme indicator goes off
and the end indicator starts to flash.
WASHING PROGRAMMES
Programme
Type of soil
Heavy soil
Crockery, cutlery,
pots and pans
Do these steps to move the upper basket
to the lower position:
1. Pull the basket out until it stops.
2. Carefully lift up the two sides.
3. Hold the mechanism and let it fall back
down slowly.
Caution!
• Do not lift or lower the basket on one
side only.
• If the basket is in the upper position,
do not put cups on the cup racks.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, an intermittent acoustic signals
sounds.
1. Open the appliance door.
• The end indicator is on.
2. Deactivate the appliance.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 70 °C
Rinses
Dry
progress 27
Programme description