Problem and alarm code
Small leak from the appliance
door.
The appliance door is difficult to
close.
The appliance door opens during
the wash cycle.
Rattling or knocking sounds from
the inside of the appliance.
The appliance trips the circuit-
beaker.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
12.1 The dishwashing and drying results are not satisfactory
Problem
Poor washing results.
48
ENGLISH
Possible cause and solution
•
The appliance is not levelled. Loosen or tighten the adjustable feet
(if applicable).
•
The appliance door is not centred on the tub. Adjust the rear foot (if
applicable).
•
The appliance is not levelled. Loosen or tighten the adjustable feet
(if applicable).
•
Parts of the tableware are protruding from the baskets.
•
The AirDry function is activated. You can deactivate the function.
"Basic settings"
Refer to
•
The tableware is not properly arranged in the baskets. Refer to bas‐
ket loading leaflet.
•
Make sure that the spray arms can rotate freely.
•
The amperage is insufficient to supply simultaneously all the appli‐
ances in use. Check the socket amperage and the capacity of the
meter or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised Serv‐
ice Centre.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
Possible cause and solution
"Daily use"
•
Refer to
loading leaflet.
•
Use more intensive washing programme.
•
Activate the Extra power option to improve the washing results of
a selected programme.
•
Clean spray arm jets and filter. Refer to
ing"
.
.
"Hints and tips"
,
and the basket
"Care and Clean‐