Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
water to feed the pump and to occur cavitation. Cavitation is the phenomenon
that in a moving fluid the local pressure is going to be lower than the vapour
pressure of the fluid. Because of this mist bells will arise who can implode with
high power in the pump and could cause damages. For all these applications at
high temperature, it is ABSOLUTELY ESSENTIAL to feed the pump with positive
pressure (at least 3 bar) and with a sufficient quantity of water.
SCOPE OF APPLICATION
Efficient high pressure cleaning is achieved by following a few guidelines
combined with your own experiences. Each cleaning job is different and
specific, therefore contact DiBO for the best solution in your application sector.
• Using cleaning products (if applicable): the surface to clean should be sprayed
so the product can act during some time (do not let it dry!) before cleaning
with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
Always follow/consider the safety instructions of the used product!
• Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and
rinsing.
• Hot water (high pressure) cleaning (if applicable): the cleaning effect will be
such improved through increasing the temperature (set the temperature
experimentally according to the application).
• Cleaning via lance with rotating head (if applicable): cleaning method to
remove tough layers of dirt.
• Cleaning using a steam lance (if applicable): this steam function (by
overheating water) is used in 'sensitive' cleaning applications (eg: damage
sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by
using steam.
Please note: this application has high cleaning
temperatures and requires various safety measures!
Intended Use: this pressure washer has been developed for use in various
professional applications (eg: building technology, cleaning technology,
industrial, transport sector, ...).
Turn off
LANCE AND GUN
Uncouple the lance and put it away. Put the operating switch on OFF. Take
the plug out of the socket. Close the water supply. Roll up the high and low
pressure hoses.
MACHINE
Clean when necessary the water filter. Put the guide away within hand range.
WATER OUTLET
Clean to own need the water supply.
PUT AWAY MACHINE
See that the machine is parked frost-proof.
ENVIRONMENTALLY SAFE DISPOSAL OF USED FLUIDS
No fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed
randomly because of the environment! So make sure, if you are user, that the
applicable local guidelines for environmentally friendly disposal of these fluids
(without soil pollution) are complied.
TRANSPORT
Pay attention at transport to the following: Keeps the machine as much as
possible horizontal during transport, one prevents that there leaks oil from the
pump. Load the machine using a lift truck, hydraulic loading platform or a hoist.
Lash the machines (if necessary) fixed on the loading platform.
DiBO 21
E N
T U R N O F F
Advertenties
Hoofdstukken
Inhoudsopgave
